<![CDATA[Eco Logical Solutions: ]]> https://wasteoilfurnaceparts.net Wed, 7 Oct 2026 00:00:00 EST en-us <![CDATA[14336 / 60068 Double Piston Air Compressor for 300K BTU or greater]]> https://wasteoilfurnaceparts.net/14336-60068-Double-Piston-Air-Compressor-for-300K-BTU-or-greater_p_458.html Wed, 7 Oct 2026 00:00:00 EST Air Compressor, double piston onboard compressor used on Clean Burn or Clean Energy waste oil heaters and boilers 280,000 BTU plus. Smaller units can use the single piston compressor. ...[Read More]
Our Price: $1,495.00 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/14336-60068-Double-Piston-Air-Compressor-for-300K-BTU-or-greater_p_458.html Air Compressor, double piston onboard compressor used on Clean Burn or Clean Energy waste oil heaters and boilers 280,000 BTU plus. Smaller units can use the single piston compressor. ...[Read More]
Our Price: $1,495.00 [Add to Cart]


]]> <![CDATA[70416 TARGET- SS OBSOLETE SEE 31232]]> https://wasteoilfurnaceparts.net/70416-TARGET-SS-OBSOLETE-SEE-31232_p_464.html Wed, 7 Oct 2026 00:00:00 EST 70416 TARGET- SS OBSOLETE SEE 31232 ...[Read More]
Our Price: $195.00 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/70416-TARGET-SS-OBSOLETE-SEE-31232_p_464.html 70416 TARGET- SS OBSOLETE SEE 31232 ...[Read More]
Our Price: $195.00 [Add to Cart]


]]> <![CDATA[ACCUMULATOR BLOCK A, 13141]]> https://wasteoilfurnaceparts.net/ACCUMULATOR-BLOCK-A-13141_p_469.html Wed, 7 Oct 2026 00:00:00 EST This is the accumulator block assembly is an aluminum block that includes the accumulator, air fitting 32039, and oil fitting 32245 used on Clean Burn furnaces CB 1400 1500 1750 1800 2500 2800 3250 3500 and 5000 ...[Read More]
Our Price: $125.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/ACCUMULATOR-BLOCK-A-13141_p_469.html This is the accumulator block assembly is an aluminum block that includes the accumulator, air fitting 32039, and oil fitting 32245 used on Clean Burn furnaces CB 1400 1500 1750 1800 2500 2800 3250 3500 and 5000 ...[Read More]
Our Price: $125.95 [Add to Cart]


]]> <![CDATA[ACCUMULATOR CLEAN BURN 32311]]> https://wasteoilfurnaceparts.net/ACCUMULATOR-CLEAN-BURN-32311_p_470.html Wed, 7 Oct 2026 00:00:00 EST This is a Clean Burn accumulator which would be installed on most Clean Burn inlet blocks also known as accumulator blocks. Located on the front door of the furnace where the air and oil connect before they go up to the burner. Clean Burn part # 323...[Read More]
Our Price: $99.00 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/ACCUMULATOR-CLEAN-BURN-32311_p_470.html This is a Clean Burn accumulator which would be installed on most Clean Burn inlet blocks also known as accumulator blocks. Located on the front door of the furnace where the air and oil connect before they go up to the burner. Clean Burn part # 323...[Read More]
Our Price: $99.00 [Add to Cart]


]]> <![CDATA[ADAPTER- 8" SINGLE WALL, 70135]]> https://wasteoilfurnaceparts.net/ADAPTER-8-SINGLE-WALL-70135_p_473.html Wed, 7 Oct 2026 00:00:00 EST This adapter is MetalFab single wall to triple wall class A stovepipe. Used to connect the singlewall pipe to the class A insulated pipe. The inner diameter is 8 and the outer diameter is 11 on the insulated end. ...[Read More]
Our Price: $119.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/ADAPTER-8-SINGLE-WALL-70135_p_473.html This adapter is MetalFab single wall to triple wall class A stovepipe. Used to connect the singlewall pipe to the class A insulated pipe. The inner diameter is 8 and the outer diameter is 11 on the insulated end. ...[Read More]
Our Price: $119.95 [Add to Cart]


]]> <![CDATA[AIR BOWL 32265]]> https://wasteoilfurnaceparts.net/AIR-BOWL-32265_p_475.html Wed, 7 Oct 2026 00:00:00 EST Air Bowl - Found in Regulator 32257 Drain off water/condensation from the valve at the bottom of this air bowl. It is used on the burners CB 90 HS, CB 90 HPB-Air and CB 85 HS. It is also sometimes used with an inline regulator to regulate the shop a...[Read More]
Our Price: $29.00 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/AIR-BOWL-32265_p_475.html Air Bowl - Found in Regulator 32257 Drain off water/condensation from the valve at the bottom of this air bowl. It is used on the burners CB 90 HS, CB 90 HPB-Air and CB 85 HS. It is also sometimes used with an inline regulator to regulate the shop a...[Read More]
Our Price: $29.00 [Add to Cart]


]]> <![CDATA[AIR LINE- 1/8 inch O.K. BLACK OR CLEAR NYLON - 32485]]> https://wasteoilfurnaceparts.net/AIR-LINE-18-inch-OK-BLACK-OR-CLEAR-NYLON--32485_p_478.html Wed, 7 Oct 2026 00:00:00 EST AIR LINE- 1/8inch O.K. from burner to the air guage on CB 500 series burners ...[Read More]
Our Price: $1.00 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/AIR-LINE-18-inch-OK-BLACK-OR-CLEAR-NYLON--32485_p_478.html AIR LINE- 1/8inch O.K. from burner to the air guage on CB 500 series burners ...[Read More]
Our Price: $1.00 [Add to Cart]


]]> <![CDATA[AIR PRESSURE SWITCH 33057]]> https://wasteoilfurnaceparts.net/AIR-PRESSURE-SWITCH-33057_p_479.html Wed, 7 Oct 2026 00:00:00 EST Air Pressure Switch used on all model Clean Burn furnaces. Part number 33057 ...[Read More]
Our Price: $52.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/AIR-PRESSURE-SWITCH-33057_p_479.html Air Pressure Switch used on all model Clean Burn furnaces. Part number 33057 ...[Read More]
Our Price: $52.95 [Add to Cart]


]]> <![CDATA[Air Tube, 1/4" x 19" tubing 13017]]> https://wasteoilfurnaceparts.net/Air-Tube-14-x-19-tubing-13017_p_482.html Wed, 7 Oct 2026 00:00:00 EST Air Tube, 1/4inch This tube goes from the connector block on the Clean Burn furnace up to the burner. This is standard with the Clean Burn models furnaces. This item will be approximately 19 long. It can easily be cut down if you have a smaller furn...[Read More]
Our Price: $3.85 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/Air-Tube-14-x-19-tubing-13017_p_482.html Air Tube, 1/4inch This tube goes from the connector block on the Clean Burn furnace up to the burner. This is standard with the Clean Burn models furnaces. This item will be approximately 19 long. It can easily be cut down if you have a smaller furn...[Read More]
Our Price: $3.85 [Add to Cart]


]]> <![CDATA[BLOWER WHEEL- HS BURNER 31003]]> https://wasteoilfurnaceparts.net/BLOWER-WHEEL-HS-BURNER-31003_p_486.html Wed, 7 Oct 2026 00:00:00 EST This Blower Wheel is inside burner used on all HS model burners with the motor 1/8 HP 33084. It can be found on Clean Burn furnace models CB 90 AA, CB 90 AH, CB 90 BH, CB 90 C, CB 90 D, CB 86 AH, CB 86 BH (CB 90 HS, CB 85 HS, CB 90 HPB-Air burners)....[Read More]
Our Price: $59.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/BLOWER-WHEEL-HS-BURNER-31003_p_486.html This Blower Wheel is inside burner used on all HS model burners with the motor 1/8 HP 33084. It can be found on Clean Burn furnace models CB 90 AA, CB 90 AH, CB 90 BH, CB 90 C, CB 90 D, CB 86 AH, CB 86 BH (CB 90 HS, CB 85 HS, CB 90 HPB-Air burners)....[Read More]
Our Price: $59.95 [Add to Cart]


]]> <![CDATA[BUSHING DUPLEX SLIP THRU TANK BUNG FITTING 2 X 1/2 X 1/2 32442]]> https://wasteoilfurnaceparts.net/BUSHING-DUPLEX-SLIP-THRU-TANK-BUNG-FITTING-2-X-12-X-12-32442_p_493.html Wed, 7 Oct 2026 00:00:00 EST This is a duplex tank fitting 2 x 1/2 x 1/2. This can be inserted on a tank with a 2 NPT thread and has 2 holes on top, each are 1/2 NPT. The Clean Burn part # 32442 ...[Read More]
Our Price: $22.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/BUSHING-DUPLEX-SLIP-THRU-TANK-BUNG-FITTING-2-X-12-X-12-32442_p_493.html This is a duplex tank fitting 2 x 1/2 x 1/2. This can be inserted on a tank with a 2 NPT thread and has 2 holes on top, each are 1/2 NPT. The Clean Burn part # 32442 ...[Read More]
Our Price: $22.95 [Add to Cart]


]]> <![CDATA[BUSS BAR 3 5/8inch - 33027 HS BURNER (QTY 1)]]> https://wasteoilfurnaceparts.net/BUSS-BAR-3-58inch--33027-HS-BURNER-QTY-1_p_494.html Wed, 7 Oct 2026 00:00:00 EST Buss Bars 3 5/8. This is for one buss bar short 3 5/8 to use on the HS style Clean Burn burners. The buss bar runs between the transformer and the electrodes. ...[Read More]
Our Price: $4.85 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/BUSS-BAR-3-58inch--33027-HS-BURNER-QTY-1_p_494.html Buss Bars 3 5/8. This is for one buss bar short 3 5/8 to use on the HS style Clean Burn burners. The buss bar runs between the transformer and the electrodes. ...[Read More]
Our Price: $4.85 [Add to Cart]


]]> <![CDATA[BUSS BARS 4 1/4" BRASS 33151 HS BURNER (QTY 1)]]> https://wasteoilfurnaceparts.net/BUSS-BARS-4-14-BRASS-33151-HS-BURNER-QTY-1_p_498.html Wed, 7 Oct 2026 00:00:00 EST  Buss Bar 4 1/4 long for use between the transformer 33004 and the electrodes 33085 and 33086.  This is the brass bar that the electricity travels through from the transformer to the electrodes. This price is for 1 buss bar.  If you need to replace b...[Read More]
Our Price: $4.85 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/BUSS-BARS-4-14-BRASS-33151-HS-BURNER-QTY-1_p_498.html  Buss Bar 4 1/4 long for use between the transformer 33004 and the electrodes 33085 and 33086.  This is the brass bar that the electricity travels through from the transformer to the electrodes. This price is for 1 buss bar.  If you need to replace b...[Read More]
Our Price: $4.85 [Add to Cart]


]]> <![CDATA[C CLIP 33198]]> https://wasteoilfurnaceparts.net/C-CLIP-33198_p_499.html Wed, 7 Oct 2026 00:00:00 EST C Clip - this clip is used to hold the brass valve stem in the solenoid. Clean Burn part # 33198...[Read More]
Our Price: $3.00 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/C-CLIP-33198_p_499.html C Clip - this clip is used to hold the brass valve stem in the solenoid. Clean Burn part # 33198...[Read More]
Our Price: $3.00 [Add to Cart]


]]> <![CDATA[CAD CELL / PHOTO EYE / FLAME SENSOR 45610 ]]> https://wasteoilfurnaceparts.net/CAD-CELL-PHOTO-EYE-FLAME-SENSOR-45610-_p_500.html Wed, 7 Oct 2026 00:00:00 EST This is a cad cell / flame sensor photo eye. If your wiring is still good you can just replace this photo eye. It has a 2 prong plug. For use with the C554A cad cell by Honeywell. Can be used on waste oil furnace brands including; Clean Burn, Clean E...[Read More]
Our Price: $9.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CAD-CELL-PHOTO-EYE-FLAME-SENSOR-45610-_p_500.html This is a cad cell / flame sensor photo eye. If your wiring is still good you can just replace this photo eye. It has a 2 prong plug. For use with the C554A cad cell by Honeywell. Can be used on waste oil furnace brands including; Clean Burn, Clean E...[Read More]
Our Price: $9.95 [Add to Cart]


]]> <![CDATA[CAD CELL 33116]]> https://wasteoilfurnaceparts.net/CAD-CELL-33116_p_502.html Wed, 7 Oct 2026 00:00:00 EST Cad Cell also known as the photo eye, electric eye or flame sensor. This is used on all the Clean Burn model furnaces. If it does not see a flame it will shut the burner off. This protects your furnace from filling up with oil if it fails to ignite. ...[Read More]
Our Price: $27.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CAD-CELL-33116_p_502.html Cad Cell also known as the photo eye, electric eye or flame sensor. This is used on all the Clean Burn model furnaces. If it does not see a flame it will shut the burner off. This protects your furnace from filling up with oil if it fails to ignite. ...[Read More]
Our Price: $27.95 [Add to Cart]


]]> <![CDATA[CAP - ROUND DUCT 10" BREECH 70428]]> https://wasteoilfurnaceparts.net/CAP--ROUND-DUCT-10-BREECH-70428_p_508.html Wed, 7 Oct 2026 00:00:00 EST Flat Round Duct Cap to cover furnace breech this replaces part number 31092. Galvanized cap. The cap is 10 inch in diameter. These are used on the CB 5000 Clean Burn waste oil furnace. ...[Read More]
Our Price: $21.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CAP--ROUND-DUCT-10-BREECH-70428_p_508.html Flat Round Duct Cap to cover furnace breech this replaces part number 31092. Galvanized cap. The cap is 10 inch in diameter. These are used on the CB 5000 Clean Burn waste oil furnace. ...[Read More]
Our Price: $21.95 [Add to Cart]


]]> <![CDATA[CAP AND BALL ASSY 32364]]> https://wasteoilfurnaceparts.net/CAP-AND-BALL-ASSY-32364_p_510.html Wed, 7 Oct 2026 00:00:00 EST Cap and Ball Assembly found in regulator kit 13142 goes with the CB 500, 525, 525S, 525S2, 550, 550-S2, 551-H3, 551-H5, A2, CB 100 and 125 burners. It is Clean Burn part # 32364 and it replaces part # 32228 which may be in some of the older furnace m...[Read More]
Our Price: $10.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CAP-AND-BALL-ASSY-32364_p_510.html Cap and Ball Assembly found in regulator kit 13142 goes with the CB 500, 525, 525S, 525S2, 550, 550-S2, 551-H3, 551-H5, A2, CB 100 and 125 burners. It is Clean Burn part # 32364 and it replaces part # 32228 which may be in some of the older furnace m...[Read More]
Our Price: $10.95 [Add to Cart]


]]> <![CDATA[CAPACITOR, METERING PUMP MOTOR 33363]]> https://wasteoilfurnaceparts.net/CAPACITOR-METERING-PUMP-MOTOR-33363_p_511.html Wed, 7 Oct 2026 00:00:00 EST CAPACITOR, METERING PUMP 33363 used with metering pump motors 33353, 33354, 33355, 33356, 33291, 33293, 33295 and 33572. ...[Read More]
Our Price: $39.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CAPACITOR-METERING-PUMP-MOTOR-33363_p_511.html CAPACITOR, METERING PUMP 33363 used with metering pump motors 33353, 33354, 33355, 33356, 33291, 33293, 33295 and 33572. ...[Read More]
Our Price: $39.95 [Add to Cart]


]]> <![CDATA[CB 500 SERIES RECONDITIONED BURNER CLEAN BURN - $500 REBATE]]> https://wasteoilfurnaceparts.net/CB-500-SERIES-RECONDITIONED-BURNER-CLEAN-BURN--500-REBATE_p_520.html Wed, 7 Oct 2026 00:00:00 EST This is a reconditioned Clean Burn CB 500 Series burner. We offer a $500 core rebate if you return a used CB 500 Series burner. If you return a CB 90 HS or other burner the rebate will only be $200. Please select your Burner Exchange Model from the d...[Read More]
Our Price: $1,995.00 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CB-500-SERIES-RECONDITIONED-BURNER-CLEAN-BURN--500-REBATE_p_520.html This is a reconditioned Clean Burn CB 500 Series burner. We offer a $500 core rebate if you return a used CB 500 Series burner. If you return a CB 90 HS or other burner the rebate will only be $200. Please select your Burner Exchange Model from the d...[Read More]
Our Price: $1,995.00 [Add to Cart]


]]>

The block is completely torn down and cleaned in our ultrasonic parts cleaner. A new service kit and many new parts are installed. All parts are cleaned. The burner is reassembled and tested for proper operation. It also comes with a 1 year warranty on all burner parts.


New parts installed automatically:


Electrodes

Nozzle

Solenoid plungers and o-rings

Regulator kit and o-rings

Primary Control

Transformer

Cad Cell

Proving Switch

Air Pressure Switch

Green Light

Amber Light

Oil Gauge

Air Gauge

Terminal Block


All other parts are checked and tested. You will need to adjust settings of air, oil and air bands according to your model of furnace. You are also responsible for cleaning your filters, cleaning your ash and making sure your heat exchanger is free of holes / cracks.

]]> <![CDATA[CEMENT- HIGH TEMP GASKET 10 OZ. 34162]]> https://wasteoilfurnaceparts.net/CEMENT-HIGH-TEMP-GASKET-10-OZ-34162_p_523.html Wed, 7 Oct 2026 00:00:00 EST High Temp Cement / Mortar. Adhesive for rope gasket. Easy to apply. Used to adhere rope gasket on clean out doors and burners. ...[Read More]
Our Price: $11.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CEMENT-HIGH-TEMP-GASKET-10-OZ-34162_p_523.html High Temp Cement / Mortar. Adhesive for rope gasket. Easy to apply. Used to adhere rope gasket on clean out doors and burners. ...[Read More]
Our Price: $11.95 [Add to Cart]


]]> <![CDATA[CEMENT HIGH TEMP GASKET 3OZ. 54171]]> https://wasteoilfurnaceparts.net/CEMENT-HIGH-TEMP-GASKET-3OZ-54171_p_524.html Wed, 7 Oct 2026 00:00:00 EST High Temp Cement Gasket 3 ounce adhesive for fiberglass Rope Gaskets. This high temp cement gasket. It is ideal for attaching the rope gasket to you clean out door. This can be used on Clean Burn and other brands of waste oil furnaces to adhere the g...[Read More]
Our Price: $8.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CEMENT-HIGH-TEMP-GASKET-3OZ-54171_p_524.html High Temp Cement Gasket 3 ounce adhesive for fiberglass Rope Gaskets. This high temp cement gasket. It is ideal for attaching the rope gasket to you clean out door. This can be used on Clean Burn and other brands of waste oil furnaces to adhere the g...[Read More]
Our Price: $8.95 [Add to Cart]


]]> <![CDATA[CENTRIFUGAL MICRO SWITCH- FOR 1/10 HP 33370]]> https://wasteoilfurnaceparts.net/CENTRIFUGAL-MICRO-SWITCH-FOR-110-HP-33370_p_525.html Wed, 7 Oct 2026 00:00:00 EST CENTRIFIGAL MICRO SWITCH- FOR 1/10 HP for burners: CB 500 CB 525 CB 525 S CB 525 S2 CB 550 CB 550 S2 CB 551 H3 Used on furnace models CB 1400 CB 1500 CB 1800 CB 1750 CB 2500 CB 2800 CB 3500 AND CB 5000 AND BOILER CB 350 CTB CB 200 CTB OR CB 700 CTB Y...[Read More]
Our Price: $19.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CENTRIFUGAL-MICRO-SWITCH-FOR-110-HP-33370_p_525.html CENTRIFIGAL MICRO SWITCH- FOR 1/10 HP for burners: CB 500 CB 525 CB 525 S CB 525 S2 CB 550 CB 550 S2 CB 551 H3 Used on furnace models CB 1400 CB 1500 CB 1800 CB 1750 CB 2500 CB 2800 CB 3500 AND CB 5000 AND BOILER CB 350 CTB CB 200 CTB OR CB 700 CTB Y...[Read More]
Our Price: $19.95 [Add to Cart]


]]> <![CDATA[CHECK VALVE 3/4inch 32021]]> https://wasteoilfurnaceparts.net/CHECK-VALVE-34inch-32021_p_528.html Wed, 7 Oct 2026 00:00:00 EST 3/4 Check valve inside tank. This is the size of check valve that comes with Clean Burn furnaces. The check valve helps maintain oil to the pump by not allowing it to flow back into the tank when the pump stops pumping. The check valve connects to th...[Read More]
Our Price: $35.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CHECK-VALVE-34inch-32021_p_528.html 3/4 Check valve inside tank. This is the size of check valve that comes with Clean Burn furnaces. The check valve helps maintain oil to the pump by not allowing it to flow back into the tank when the pump stops pumping. The check valve connects to th...[Read More]
Our Price: $35.95 [Add to Cart]


]]> <![CDATA[CHECK VALVE SCREEN 32061 TANK FILTER - 50 MESH]]> https://wasteoilfurnaceparts.net/CHECK-VALVE-SCREEN-32061-TANK-FILTER--50-MESH_p_532.html Wed, 7 Oct 2026 00:00:00 EST This Check Valve Screen Filter can be used in any brand of waste oil furnace. It should be installed approximately 10 above the bottom of the tank to avoid sucking up the water and sludge that settles on the bottom. It has a 3/4 thread and is used w...[Read More]
Our Price: $26.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CHECK-VALVE-SCREEN-32061-TANK-FILTER--50-MESH_p_532.html This Check Valve Screen Filter can be used in any brand of waste oil furnace. It should be installed approximately 10 above the bottom of the tank to avoid sucking up the water and sludge that settles on the bottom. It has a 3/4 thread and is used w...[Read More]
Our Price: $26.95 [Add to Cart]


]]> <![CDATA[CLEAN BURN 70158 SERVICE KIT / TUNE UP KIT (AA & AH) DELUXE]]> https://wasteoilfurnaceparts.net/CLEAN-BURN-70158-SERVICE-KIT-TUNE-UP-KIT-AA-AH-DELUXE_p_534.html Wed, 7 Oct 2026 00:00:00 EST This service kit is compatible with the CB 90 AA, CB 90 AH and CB 86 AH furnaces. It includes the following items: Pair of HS ElectrodesNozzle 9-52 Solenoid Nucleus and spring2 Solenoid O-ringsDiaphragm, for Oil RegulatorSpring, for Oil Regulator Se...[Read More]
Our Price: $109.95 On Sale [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CLEAN-BURN-70158-SERVICE-KIT-TUNE-UP-KIT-AA-AH-DELUXE_p_534.html This service kit is compatible with the CB 90 AA, CB 90 AH and CB 86 AH furnaces. It includes the following items: Pair of HS ElectrodesNozzle 9-52 Solenoid Nucleus and spring2 Solenoid O-ringsDiaphragm, for Oil RegulatorSpring, for Oil Regulator Se...[Read More]
Our Price: $109.95 On Sale [Add to Cart]


]]>

  • Pair of HS Electrodes
  • Nozzle 9-5
  • 2 Solenoid Nucleus and spring
  • 2 Solenoid O-rings
  • Diaphragm, for Oil Regulator
  • Spring, for Oil Regulator Seat
  • Gasket Ring, for Oil Regulator
  • Seat, for Oil Regulator
  • Stem Guide, for Oil Regulator
  • Guide Seal, for Oil Regulator
  • O-ring for Nozzle Adapter
  • Pump Cover Gasket, J-Pump

These are the common wear parts needed to tune up your furnace annually.

]]> <![CDATA[CLEAN BURN 70371 SERVICE KIT / TUNE UP KIT CB 525 S2, CB 550 S2]]> https://wasteoilfurnaceparts.net/CLEAN-BURN-70371-SERVICE-KIT-TUNE-UP-KIT-CB-525-S2-CB-550-S2_p_536.html Wed, 7 Oct 2026 00:00:00 EST This service kit inlcludes common wear parts need to preform annual maintenance on your Clean Burn burner. This service kit is for the CB 525 S2, CB 550 S2, CB 551 H3 and CB 551 H5 burners. The burner model is separate from the furnace model which is...[Read More]
Our Price: $176.95 On Sale [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CLEAN-BURN-70371-SERVICE-KIT-TUNE-UP-KIT-CB-525-S2-CB-550-S2_p_536.html This service kit inlcludes common wear parts need to preform annual maintenance on your Clean Burn burner. This service kit is for the CB 525 S2, CB 550 S2, CB 551 H3 and CB 551 H5 burners. The burner model is separate from the furnace model which is...[Read More]
Our Price: $176.95 On Sale [Add to Cart]


]]> <![CDATA[CLEAN BURN SERVICE KIT 70370 / 70139 CB 500, 550, 525 & 525-S]]> https://wasteoilfurnaceparts.net/CLEAN-BURN-SERVICE-KIT-70370-70139-CB-500-550-525-525-S_p_537.html Wed, 7 Oct 2026 00:00:00 EST This Service kit is for annual maintenance of furnaces with the CB 500, CB 525 or CB 525 S burners. You can find your burner model on your burner. This is separate from the furnace model that is on the cabinet. Parts include:33183 Electrode32000 N...[Read More]
Our Price: $176.95 On Sale [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CLEAN-BURN-SERVICE-KIT-70370-70139-CB-500-550-525-525-S_p_537.html This Service kit is for annual maintenance of furnaces with the CB 500, CB 525 or CB 525 S burners. You can find your burner model on your burner. This is separate from the furnace model that is on the cabinet. Parts include:33183 Electrode32000 N...[Read More]
Our Price: $176.95 On Sale [Add to Cart]


]]>
Parts include:

33183 Electrode
32000 Nozzle (selection required per model)
13142 - Regulator Kits (2)
33229 - Nucleus and Spring for solenoids (2)
33124 - Solenoid O-Ring (2)
]]> <![CDATA[CLEAN OUT TOOL, COMBUSTION SCRAPER RAKE 65034]]> https://wasteoilfurnaceparts.net/CLEAN-OUT-TOOL-COMBUSTION-SCRAPER-RAKE-65034_p_538.html Wed, 7 Oct 2026 00:00:00 EST Clean out tool used to scrap out combustion chamber. Rounded edge rakes ash towards you making it easier to remove ash from the heat exchanger. Can be used with the 3' Handle 70037. Will work for Clean Burn or Clean Energy waste oil heaters. ...[Read More]
Our Price: $35.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CLEAN-OUT-TOOL-COMBUSTION-SCRAPER-RAKE-65034_p_538.html Clean out tool used to scrap out combustion chamber. Rounded edge rakes ash towards you making it easier to remove ash from the heat exchanger. Can be used with the 3' Handle 70037. Will work for Clean Burn or Clean Energy waste oil heaters. ...[Read More]
Our Price: $35.95 [Add to Cart]


]]> <![CDATA[CONN. PLUG (MALE)- 500 BRN - 33149]]> https://wasteoilfurnaceparts.net/CONN-PLUG-MALE-500-BRN--33149_p_539.html Wed, 7 Oct 2026 00:00:00 EST Connector Plug 33149, male for use on Clean Burn burners 500, 525, 525S, 525S2 and 550 S/S2. This quick connect plug is wired to the burner. It mates with the yellow cord that's wired into the cabinet allowing you to disconnect and swing the cabinet ...[Read More]
Our Price: $36.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CONN-PLUG-MALE-500-BRN--33149_p_539.html Connector Plug 33149, male for use on Clean Burn burners 500, 525, 525S, 525S2 and 550 S/S2. This quick connect plug is wired to the burner. It mates with the yellow cord that's wired into the cabinet allowing you to disconnect and swing the cabinet ...[Read More]
Our Price: $36.95 [Add to Cart]


]]> <![CDATA[CONNECTOR PLUG (FEMALE) 14/18/2800 12198]]> https://wasteoilfurnaceparts.net/CONNECTOR-PLUG-FEMALE-14182800-12198_p_540.html Wed, 7 Oct 2026 00:00:00 EST Connector Plug / Yellow Cord female end connects to male plug 33149 on the burner. For use on the CB 1400 1800 2800 furnaces. This cord is shorter then the cord used on other Clean Burn furnaces. If you would like a longer cord, please order 33336. ...[Read More]
Our Price: $67.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CONNECTOR-PLUG-FEMALE-14182800-12198_p_540.html Connector Plug / Yellow Cord female end connects to male plug 33149 on the burner. For use on the CB 1400 1800 2800 furnaces. This cord is shorter then the cord used on other Clean Burn furnaces. If you would like a longer cord, please order 33336. ...[Read More]
Our Price: $67.95 [Add to Cart]


]]> <![CDATA[CONNECTOR MALE 3/16inch T X 1/8NPT - 32043]]> https://wasteoilfurnaceparts.net/CONNECTOR-MALE-316inch-T-X-18NPT--32043_p_541.html Wed, 7 Oct 2026 00:00:00 EST Connector Male 3/16 T x 1/8 NPT fitting for metering pump 32043.  ...[Read More]
Our Price: $3.50 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CONNECTOR-MALE-316inch-T-X-18NPT--32043_p_541.html Connector Male 3/16 T x 1/8 NPT fitting for metering pump 32043.  ...[Read More]
Our Price: $3.50 [Add to Cart]


]]> <![CDATA[CONNECTOR PLUG FEMALE - 3500/5000 33150]]> https://wasteoilfurnaceparts.net/CONNECTOR-PLUG-FEMALE--35005000-33150_p_542.html Wed, 7 Oct 2026 00:00:00 EST Connector Plug female (yellow cord) used on furnace models CB 3500 / 5000. This plug wires into the furnace cabinet and plugs into the connector plug on the burner. Mates with part # 33149. ...[Read More]
Our Price: $67.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CONNECTOR-PLUG-FEMALE--35005000-33150_p_542.html Connector Plug female (yellow cord) used on furnace models CB 3500 / 5000. This plug wires into the furnace cabinet and plugs into the connector plug on the burner. Mates with part # 33149. ...[Read More]
Our Price: $67.95 [Add to Cart]


]]> <![CDATA[CONNECTOR PLUG FEMALE 33336]]> https://wasteoilfurnaceparts.net/CONNECTOR-PLUG-FEMALE-33336_p_543.html Wed, 7 Oct 2026 00:00:00 EST CONNECTOR PLUG 33336 FEMALE YELLOW CORD / PIGTAIL - LONGER PLUG FOR CB 1500 / CB 1750 / CB 2500 / CB3250 (HORIZONTAL FURNACE MODELS) CAN ALSO BE USED ON CB 3500 / CB 5000. PLUG RUNS FROM THE CABINET TO THE BURNER. MATES WITH CB 33149 MALE PLUG ON BUR...[Read More]
Our Price: $76.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CONNECTOR-PLUG-FEMALE-33336_p_543.html CONNECTOR PLUG 33336 FEMALE YELLOW CORD / PIGTAIL - LONGER PLUG FOR CB 1500 / CB 1750 / CB 2500 / CB3250 (HORIZONTAL FURNACE MODELS) CAN ALSO BE USED ON CB 3500 / CB 5000. PLUG RUNS FROM THE CABINET TO THE BURNER. MATES WITH CB 33149 MALE PLUG ON BUR...[Read More]
Our Price: $76.95 [Add to Cart]


]]> <![CDATA[CONNECTOR PLUG MALE 33102 - YELLOW CORD HS]]> https://wasteoilfurnaceparts.net/CONNECTOR-PLUG-MALE-33102--YELLOW-CORD-HS_p_544.html Wed, 7 Oct 2026 00:00:00 EST Connector Plug Mail with yellow cord. It is used on all HS burner models. Connects burner to cabinet. ...[Read More]
Our Price: $79.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CONNECTOR-PLUG-MALE-33102--YELLOW-CORD-HS_p_544.html Connector Plug Mail with yellow cord. It is used on all HS burner models. Connects burner to cabinet. ...[Read More]
Our Price: $79.95 [Add to Cart]


]]> <![CDATA[CONNECTOR RECEPTACLE - PLUG 33103 FEMALE FOR HS BURNER]]> https://wasteoilfurnaceparts.net/CONNECTOR-RECEPTACLE--PLUG-33103-FEMALE-FOR-HS-BURNER_p_545.html Wed, 7 Oct 2026 00:00:00 EST CONNECTOR RECEPTACLE - FEMALE PLUG MATES W/ 33102 WITH MALE PLUG ON HS BURNERS MODELS. IT IS FOUND ON FURNACE MODELS CB 90 AA AH BH C D 86 AH/BH 85 C/D CB 2000 4000 ...[Read More]
Our Price: $54.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CONNECTOR-RECEPTACLE--PLUG-33103-FEMALE-FOR-HS-BURNER_p_545.html CONNECTOR RECEPTACLE - FEMALE PLUG MATES W/ 33102 WITH MALE PLUG ON HS BURNERS MODELS. IT IS FOUND ON FURNACE MODELS CB 90 AA AH BH C D 86 AH/BH 85 C/D CB 2000 4000 ...[Read More]
Our Price: $54.95 [Add to Cart]


]]> <![CDATA[CONTRACTOR 120 V Single Pole 33207]]> https://wasteoilfurnaceparts.net/CONTRACTOR-120-V-Single-Pole-33207_p_546.html Wed, 7 Oct 2026 00:00:00 EST CONTRACTOR 120 V Single Pole 33207 ...[Read More]
Our Price: $32.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CONTRACTOR-120-V-Single-Pole-33207_p_546.html CONTRACTOR 120 V Single Pole 33207 ...[Read More]
Our Price: $32.95 [Add to Cart]


]]> <![CDATA[CONTRACTOR 240 V 33182]]> https://wasteoilfurnaceparts.net/CONTRACTOR-240-V-33182_p_547.html Wed, 7 Oct 2026 00:00:00 EST CONTRACTOR 240 V 2 Double Pole 33182...[Read More]
Our Price: $31.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/CONTRACTOR-240-V-33182_p_547.html CONTRACTOR 240 V 2 Double Pole 33182...[Read More]
Our Price: $31.95 [Add to Cart]


]]> <![CDATA[COUPLING- MTG. PUMP 33304]]> https://wasteoilfurnaceparts.net/COUPLING-MTG-PUMP-33304_p_553.html Wed, 7 Oct 2026 00:00:00 EST Coupling for metering pump - compatible with the suntec metering pump A2RA-7710 or A2RA-7720 on Clean Burn waste oil metering pumps.  Coupler connects pump to motor shaft.  ...[Read More]
Our Price: $9.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/COUPLING-MTG-PUMP-33304_p_553.html Coupling for metering pump - compatible with the suntec metering pump A2RA-7710 or A2RA-7720 on Clean Burn waste oil metering pumps.  Coupler connects pump to motor shaft.  ...[Read More]
Our Price: $9.95 [Add to Cart]


]]> <![CDATA[COUPLING- PUMP J 31012]]> https://wasteoilfurnaceparts.net/COUPLING-PUMP-J-31012_p_554.html Wed, 7 Oct 2026 00:00:00 EST Pump Coupling used between Pump Head 32020 / Motor 33002 J Pump. COUPLER CONNECTS SHAFT OF MOTOR TO SHAFT OF PUMP HEAD. ...[Read More]
Our Price: $56.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/COUPLING-PUMP-J-31012_p_554.html Pump Coupling used between Pump Head 32020 / Motor 33002 J Pump. COUPLER CONNECTS SHAFT OF MOTOR TO SHAFT OF PUMP HEAD. ...[Read More]
Our Price: $56.95 [Add to Cart]


]]> <![CDATA[DAMPER- BAROMETRIC 8inch 31170]]> https://wasteoilfurnaceparts.net/DAMPER-BAROMETRIC-8inch-31170_p_556.html Wed, 7 Oct 2026 00:00:00 EST Barometric Damper, 31170 is 8 - fits inside of tee on 8 ID pipe (tee not included) ...[Read More]
Our Price: $179.00 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/DAMPER-BAROMETRIC-8inch-31170_p_556.html Barometric Damper, 31170 is 8 - fits inside of tee on 8 ID pipe (tee not included) ...[Read More]
Our Price: $179.00 [Add to Cart]


]]> <![CDATA[DAMPER- BAROMETRIC 9inch to 10inch 31197]]> https://wasteoilfurnaceparts.net/DAMPER-BAROMETRIC-9inch-to-10inch-31197_p_557.html Wed, 7 Oct 2026 00:00:00 EST Barometric Damper used on CB 5000 Clean Burn waste oil furnaces that take 10 inch stack. This barometric damper is 9 inches but it comes with a 10 adapter so that it could be used with either 9 or 10 inner diameter pipe (adapter included). This dampe...[Read More]
Our Price: $199.00 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/DAMPER-BAROMETRIC-9inch-to-10inch-31197_p_557.html Barometric Damper used on CB 5000 Clean Burn waste oil furnaces that take 10 inch stack. This barometric damper is 9 inches but it comes with a 10 adapter so that it could be used with either 9 or 10 inner diameter pipe (adapter included). This dampe...[Read More]
Our Price: $199.00 [Add to Cart]


]]> <![CDATA[DEKTITE KIT #8 70017 / 90158]]> https://wasteoilfurnaceparts.net/DEKTITE-KIT-8-70017-90158_p_559.html Wed, 7 Oct 2026 00:00:00 EST Rubber Dektite #9 flashing for 8 inch stack. Dektite comes with screws to attach dektite to the roof and sealant. This is ideal for metal roofs and can be used on 8 or 10 chimney installations. Proper installation creates a seal to prevent rain from ...[Read More]
Our Price: $166.95 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/DEKTITE-KIT-8-70017-90158_p_559.html Rubber Dektite #9 flashing for 8 inch stack. Dektite comes with screws to attach dektite to the roof and sealant. This is ideal for metal roofs and can be used on 8 or 10 chimney installations. Proper installation creates a seal to prevent rain from ...[Read More]
Our Price: $166.95 [Add to Cart]


]]> <![CDATA[DIAPHRAGM - OIL- HS 32103]]> https://wasteoilfurnaceparts.net/DIAPHRAGM--OIL-HS-32103_p_564.html Wed, 7 Oct 2026 00:00:00 EST This is the diaphragm 32103 used in oil regulator 32012 on the HS burners including; CB 90 HS, CB 90 HPB-Air and CB 85 HS ...[Read More]
Our Price: $30.00 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/DIAPHRAGM--OIL-HS-32103_p_564.html This is the diaphragm 32103 used in oil regulator 32012 on the HS burners including; CB 90 HS, CB 90 HPB-Air and CB 85 HS ...[Read More]
Our Price: $30.00 [Add to Cart]


]]> <![CDATA[DIAPHRAGM- REGULATOR 500 BURNER 32360 (replaces 32225)]]> https://wasteoilfurnaceparts.net/DIAPHRAGM-REGULATOR-500-BURNER-32360-replaces-32225_p_566.html Wed, 7 Oct 2026 00:00:00 EST Diaphragm 32360 found in air / oil regulator kit 13142 goes with the 500, 525, 525S, 525S2 and 550 S/S2 burners replaces 32225 in the CB 500 burner ...[Read More]
Our Price: $25.00 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/DIAPHRAGM-REGULATOR-500-BURNER-32360-replaces-32225_p_566.html Diaphragm 32360 found in air / oil regulator kit 13142 goes with the 500, 525, 525S, 525S2 and 550 S/S2 burners replaces 32225 in the CB 500 burner ...[Read More]
Our Price: $25.00 [Add to Cart]


]]> <![CDATA[DIAPHRAGM RING 32226]]> https://wasteoilfurnaceparts.net/DIAPHRAGM-RING-32226_p_567.html Wed, 7 Oct 2026 00:00:00 EST Metal Diaphragm ring 32226 used in the air or oil regulators on all 500 series burners including the Clean Burn CB 500, CB 525, CB 525S, CB 525 S2 and CB 550 S/S2 waste oil burners. ...[Read More]
Our Price: $7.85 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/DIAPHRAGM-RING-32226_p_567.html Metal Diaphragm ring 32226 used in the air or oil regulators on all 500 series burners including the Clean Burn CB 500, CB 525, CB 525S, CB 525 S2 and CB 550 S/S2 waste oil burners. ...[Read More]
Our Price: $7.85 [Add to Cart]


]]> <![CDATA[DISK 32101 - for oil regulator on HS burners]]> https://wasteoilfurnaceparts.net/DISK-32101--for-oil-regulator-on-HS-burners_p_569.html Wed, 7 Oct 2026 00:00:00 EST This is the disk part # 32101 used in the brass oil regulator 32012 for the HS Clean Burn burner models; CB 90 HS, CB 85 HS and CB 90 HPB-Air. ...[Read More]
Our Price: $14.75 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/DISK-32101--for-oil-regulator-on-HS-burners_p_569.html This is the disk part # 32101 used in the brass oil regulator 32012 for the HS Clean Burn burner models; CB 90 HS, CB 85 HS and CB 90 HPB-Air. ...[Read More]
Our Price: $14.75 [Add to Cart]


]]> <![CDATA[DOOR GASKET CB 2500 - 31183]]> https://wasteoilfurnaceparts.net/DOOR-GASKET-CB-2500--31183_p_570.html Wed, 7 Oct 2026 00:00:00 EST Door insulation 31183 on the front door with hole for the burner Used on the Clean Burn model CB 2500, CB 1500, CB 1750 and CB 3250 waste oil furnace. You may have another variation of these models such as 1501, 1502 or 2501. This board will also wor...[Read More]
Our Price: $219.00 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/DOOR-GASKET-CB-2500--31183_p_570.html Door insulation 31183 on the front door with hole for the burner Used on the Clean Burn model CB 2500, CB 1500, CB 1750 and CB 3250 waste oil furnace. You may have another variation of these models such as 1501, 1502 or 2501. This board will also wor...[Read More]
Our Price: $219.00 [Add to Cart]


]]> <![CDATA[DRAFT GAUGE 70001 - DISCONTINUED]]> https://wasteoilfurnaceparts.net/DRAFT-GAUGE-70001--DISCONTINUED_p_571.html Wed, 7 Oct 2026 00:00:00 EST DRAFT GAUGE 70001 - Service tool for checking draft This can be used on any model waste oil furnace with any size stack. ...[Read More]
Our Price: $259.00 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/DRAFT-GAUGE-70001--DISCONTINUED_p_571.html DRAFT GAUGE 70001 - Service tool for checking draft This can be used on any model waste oil furnace with any size stack. ...[Read More]
Our Price: $259.00 [Add to Cart]


]]> <![CDATA[DRAFT INDUCER 10inch DI-3 - 70046]]> https://wasteoilfurnaceparts.net/DRAFT-INDUCER-10inch-DI-3--70046_p_572.html Wed, 7 Oct 2026 00:00:00 EST DRAFT INDUCER 10inch DI-3. This is the draft inducer that you would use on a 10 inner diameter chimney. We also carry a single wall pipe 70348 with the hole already cut out for this draft inducer. This model would be used on the Clean Burn CB 5000 wa...[Read More]
Our Price: $1,395.00 [Add to Cart]


]]> https://wasteoilfurnaceparts.net/DRAFT-INDUCER-10inch-DI-3--70046_p_572.html DRAFT INDUCER 10inch DI-3. This is the draft inducer that you would use on a 10 inner diameter chimney. We also carry a single wall pipe 70348 with the hole already cut out for this draft inducer. This model would be used on the Clean Burn CB 5000 wa...[Read More]
Our Price: $1,395.00 [Add to Cart]


]]>